IP Camera with 4G SIM Card – Configuration Instructions

Step 1: Insert the microSD card and 4G SIM card

1. Release the 4 screws at the back of the dome camera. (Leave the screws inside the camera; they cannot be pulled out.)
2. Open the back cover and insert the microSD card and the 4G SIM card.
3. Attach the holder to the dome camera and mount the unit to the wall.

Step 2: Download the CamHi app to your phone

1. Scan the QR code below, or search for CamHi in the App Store / Google Play Store.

iOS / Android app QR

Step 3: Configure the network connection

1. Connect the camera to power and switch it on. The camera will start its power-on self-test (POST).
2. On your mobile, open Wi-Fi settings and select the network starting with MIFI****. Password: 1234567890
3. Once connected, check your phone's internet connection (try browsing a Google page).
4. Open CamHi, tap Add Camera → leave the default username and password → select Search Camera from LAN.
5. Choose the connected camera, save, and start to test the camera.

Note: The RJ45 (network cable) port is disabled on the 4G model.

Further Configuration via PC

There are two ways to access the camera's configuration: through an internet browser or through installed software.

1. Access the camera via your internet browser. Find the camera's IP address (most likely 192.168.100.1) and enter it in the browser. Username / password: admin
2. You can also configure the camera on a PC. Download the P2P client IP Camera software:

Download PC Software (Windows)

For operation of the software, see the “6 Computer Clients Setting” section in the attached pamphlet.